Wall Panels
Besides facade walls, “Polyurethane Insulated Roof Panels” are used
as partition walls and ceiling coverings. Wall panels can be erected
horizontal or vertically. Interior and exterior sheet corrugations
can be profiled as trapezoidal, lined, or as combination upon request.
Standard corrugation profile for interior and exterior sheets are trapezoidal.
With the “Hidden screw” joint detail, screws connecting panels to the structural
system are not visible.
SPD 1015
Lined on two sides
h=40-50-60-75-100 mm
Panel Length=Minimum 800 mm,
Maximum – transportation limit
Load Value
Joint Detay
Corrugation Types of Wall Panel
SPD 1015
Microlined on two sides
h=40-50-60-75-100 mm
Panel Length=Minimum 800 mm,
Maximum – transportation limit
SPD 1015
Lined on outside Microlined on inside
h=40-50-60-75-100 mm
Panel Length=Minimum 800 mm,
Maximum – transportation limit
SPD 1015Microlined on outside Lined on inside
h=40-50-60-75-100 mm
Panel Length=Minimum 800 mm,
Maximum – transportation limit
Accessoires and Flashings
Accessories:
Sponge sealants are used at the ridges and eaves.
Screws are used for fixation of the panels and flashings.
Flashing:
Can be produced at maximum 6 m length, according to desired thickness,
color and form. Edge, eaves, corner, window and door flashings etc.
Are produced according to the exact dimensions from drawings and
measurements from the site. Besides weather sealing features these
flashings provide esthetical finishings of the claddings.